PBN

PM620

FTTx Gigabit Optical Network Unit

PM620

About the Product

The PBN PM620 is the successor of PBN’s successful PM520 product, featuring the latest industry chipset and added support for the ITU-based GEPON standard. With wire-speed switching, NAT speed upto 900 Mbps, this device helps distribute the FTTH experience within the consumers home. Wi-Fi speeds of up to 600Mbps with triple-antenna 802.11 AC standard as well as backward compatible 802.11 b/g/n connects all devices in a user's home seamlessly. With public Wi-Fi network offerings by MSOs becoming more popular every day, the PM620 supports up to 4 SSIDs which allow the re-use of the high-speed infrastructure without impacting the end-user's experience.

Same as in the previous product families, PM620 CPE comes with embedded VoIP, Wi-Fi and routing capabilities, as well as with PBNs optional full-band CATV receiver for dual- and single-fiber deployments. With TR069 provisioning capabilities out of the box, the new CPE can be used either in conjunction with NMSE or the provider's incumbent provisioning system.

  • Service access over IEEE802.3ah GEPON
  • 4x 10/100/1000Mbps routed/bridged user ports with auto cross-over (MDI/MDI-X)
  • Management through TR069 or DOCSIS-like IPv4 DHCP/TFTP flow, an embedded web-server and plain XML configuration file
  • Enhanced security with 128-bit AES
  • Supports 4 simultaneous SSIDs allowing for commercial hotspot applications. Perfect for offices or the hospitality industry
  • System management provided by PBN's NMSE management and provisioning software for broadband data services and CATV solutions
 
  • Smart fast installation, either on a desktop or mounting on a wall. Includes fiber organizer for standalone installation, as well as a snap-on attachment
  • High-performance optical CATV receiver delivering full-spectrum television from 45 to 1000 MHz
  • CATV Module removable by customer
  • Controllable optical Automatic Gain Control (AGC) circuit, to maintain a constant RF-Output level at the CATV module
  • IPv6 supported
  • SIP VoIP functionality with two physical RJ11 ports
  • 802.11 a/b/g/n/ac Wi-Fi capability
Optical Interface-GEPON

Data TX operating wavelength 

1310 nm ± 20 nm

Data RX operating wavelength 

1490 nm ± 10 nm

Optical RX sensitivity

< -24 dBm @ 1490 nm

Data RX saturation

≥ -6 dBm @ 1490 nm

Data TX output

-1 dBm to 4 dBm @ 1310 nm

Data line speed

Downstream
Upstream

 

1.25 Gbps
1.25 Gbps

Optical connector 

SC/PC (SC/APC with CATV)

User-Side Ports
Interface

4x10/100/1000 Mbps, full/half duplex with auto-negotiation, auto MDI/MDIX

IEEE802.1D

4k MAC addresses total per ONU

IEEE802.1Q

VLAN support, QinQ support

QoS 

IEEE802.1p

Frame size 64 to 1522 bytes
Data security 128-bit AES
Connectors 4 x RJ45, 2 x RJ11
CATV Performance
CATV input

-8 to +2 dBm 

CATV ON/OFF control

ON/OFF by microcontroller 

CATV wavelength

1550 ± 5 nm 

RF output

20 dBmV (80 dBuV) @ -5 dBm(1) 

RF bandwidth 45 ~ 1000 MHz
RF flatness ± 1 dB typical
± 1.5 dB maximum
RF return loss > 14 dB
RF connector SCTE F-type
Automatic gain control -7 to 0 dBm optical
CATV Link Performance

42 CENELEC channels (as per EN50083-3) / 110 NTSC channels (as per NCTA standard)

CNR

CSO

CTB

> 48 dB

< -55 dBc

< -61 dBc

VoIP Performance
VoIP

SIP v2

Voice Codecs

G.711, G.729 

Features

Call forward unconditional 
​Call forward on busy
Call forward on no answer
Call hold / release
Call waiting
Caller ID
Line Echo Cancellation (LEC)
Adaptive jitter buffer
Packet Loss Concealment
Comfortable Voice Generator
Modem/Fax support (T.38) 

Phone connectors 2 x RJ11 (POTS)
General
Input voltage

12 Vdc, 1.5 A

Mains power adapter

100~240 Vac, 50~60 Hz, 0.5 A max. 

Power consumption

< 16.0 W (data, VOIP, CATV, Wi-Fi) 

Operating temperature -10 ºC to +50 ºC
Storage temperature -20 ºC to +70 ºC
Operating / storage humidity 10 % to 90 % (non-condensing)
Dimensions
(H x W x D)
46 mm x 207 mm x 147 mm
Net weight 0.55 kg

Carton dimensions
(H x W x D)

88 mm x 325 mm x 210 mm
Packed weight (2)  1.2 kg
Shipping carton dimensions
(contains 10 units)

450mm x 445mm x 345mm 

Shipping carton weight
(contains 10 units)
13 kg

(1) Measured with PBN LTM15 test transmitter over 5 km fiber, set for -5 dBm optical input at 1550 nm with 4 % OMI. 

(2) Including AC Power Adapter and accessories. 

 

PM620 is ideal for use in commercial and residential installations when value is a priority. The application diagram shows a typical hybrid HFC-FTTx scenario with CATV overlay utilizing PBN's AIMA3000.

Due to its extensive feature set, PM620 is very competitive in fiberto-home and hospitality businesses where multiple Wi-Fi SSIDs, IPTV, and security applications are used in a dense short-haul deployment. Integrated into a single management system, the entire HFC-FTTx environment is able to be monitored and provisioned by the operator from a single screen.

For the CATV overlay components, PBN's 1RU EDFA and LTE product line can be used, instead of the larger AIMA3000 carriergrade RF headend solution, based on operator needs.

 

PM620-[V]-[W]-[X]-[Y]-[Z]

IEEE 802.3ah GEPON ONU

* Please contact a PBN Sales Representative for order details information.